冻干 · 70 mg total (50 + 10 + 10) GLOW 70 mg Blend 70 mg total (50 + 10 + 10) — 经 HPLC 验证的多肽瓶

Skin & Cosmetic 70 mg total (50 + 10 + 10)

GLOW Blend 70mg — GHK-Cu 50mg + BPC-157 10mg + TB-500 10mg

Q: What's in GLOW 70mg?

One GLOW vial contains 50mg GHK-Cu, 10mg BPC-157, and 10mg TB-500 — 70mg total peptide mass, co-lyophilized. Each individual peptide is synthesized to ≥99% HPLC purity, identity-confirmed by ESI-MS, then combined in the fixed 50/10/10 ratio before final lyophilization. No fillers beyond standard mannitol cryoprotectant.

Q: Why is GLOW called GLOW?

The "GLOW" name comes from the combined skin, hair, and recovery profile of the three peptides — GHK-Cu for skin remodeling and antioxidant defense, BPC-157 for vascular and connective tissue support, TB-500 for cellular migration and remodeling. Together they cover the surface (skin, hair) and the deeper repair cascade in a single injection.

Q: How do I dose the GLOW blend?

Reconstitute 70mg in 2mL of bacteriostatic water. Each 0.1mL then contains 2.5mg GHK-Cu + 0.5mg BPC-157 + 0.5mg TB-500. Reference protocols commonly run one daily injection during a 4-6 week loading phase, then taper to 2-3x/week for maintenance. Adjust to your goals.

Q: Why a blend instead of three vials?

Three reasons: lower total cost than buying singles, one injection instead of three, and a tested ratio that matches the protocols most users converge on. The trade-off is the fixed ratio — if you want, for example, double TB-500 without doubling GHK-Cu, the singles are the right call.

Q: Is GLOW good for hair regrowth?

The GHK-Cu component is the headline ingredient for follicle and scalp work. BPC-157 and TB-500 contribute vascular and cellular-migration support that complements the GHK-Cu mechanism. Most users report visible scalp results around the 3-6 month mark of consistent application. Results depend on baseline follicle viability.

Q: Is the entire GLOW blend tested per lot?

Yes — each component is tested before blending, and the final blended lot is re-verified for total mass, copper content (GHK-Cu integrity), and endotoxin. The COA shipped with your vial lists HPLC purity for each peptide, ESI-MS identity, LAL endotoxin <0.5 EU/mg, and sterility, all from ISO 17025-accredited labs.

Q: How long is reconstituted GLOW stable?

~30 days refrigerated at 2-8°C, protected from light. The dry vial is stable for 24+ months sealed. The blue tint of the solution after reconstitution comes from the copper complex in GHK-Cu — that's normal. A loss of color over time can indicate copper dissociation.

Skin + hair + recovery stack · Three peptides, one vial · The "glow" combo

Premium Grade Skin Stack

Skin and dermal-support blend — copper peptide combined with two flagship healing peptides in a single preparation.

CAS 编号: Blend
分子量: Mixed
纯度: ≥ 99.0% (HPLC, each component)
储存: −20 °C，冻干

氨基酸序列 GHK-Cu 50 mg + BPC-157 10 mg + TB-500 10 mg co-lyophilized

选择您的套装

1 瓶 $63 /瓶 $63 总计最受欢迎 3 瓶 $44 /瓶 $132 总计最高性价比 10 瓶 $32 /瓶 $320 总计

订单满 $59 免费$7.99 美国境内（48小时）· $14.99 全球（5个工作日）

低调包装普通隔热邮袋，外包装不显示化合物名称。

分析证书

每批次分析报告 — HPLC、ESI-MS、LAL 内毒素检测、重金属、无菌性

当前批次GLO246

已放行2026-04-28

HPLC 纯度99.82%

内毒素（LAL）通过 · < 0.5 EU/mg

阅读完整 COA 查看所有实验室结果

关于 GLOW 70 mg Blend

Buy the GLOW Blend 70mg at IGF1 Shop. GLOW co-lyophilizes three of the most studied skin and tissue peptides in a single vial: 50mg of GHK-Cu (copper tripeptide) for skin remodeling and antioxidant defense, 10mg of BPC-157 for cytoprotective signaling and vascular repair, and 10mg of TB-500 for actin sequestration and angiogenesis. Together they cover the surface (skin, hair) and the deeper repair cascade in a single injection. Each peptide in the GLOW blend is independently HPLC ≥99% pure, ESI-MS verified, and the blended lot ships with a per-lot Certificate of Analysis from an ISO 17025 laboratory.

又称： GLOW blend · GHK-Cu BPC-157 TB-500 blend · Skin & recovery stack

GLOW 70 mg Blend — 作用机制与规格

The GLOW blend co-lyophilizes three of the most studied skin and tissue compounds: GHK-Cu for gene-expression modulation and tissue remodeling, BPC-157 for cytoprotective signaling, and TB-500 for actin sequestration and angiogenesis. Designed as a single preparation for dermal and connective-tissue applications.

质量与放行标准

GLOW 70 mg Blend 的每批次仅在通过反相 HPLC（220 nm 下对照参考标准品面积纯度 ≥ 99%）、ESI 质谱分子量确认及鲎变形细胞溶解物（LAL）内毒素检测（低于 0.5 EU/mg）后才予以放行。批次专属分析证书随订单提供，购买前可按需索取。

常见问题

GLOW 70 mg Blend — 常见问题

What's in GLOW 70mg?

One GLOW vial contains 50mg GHK-Cu, 10mg BPC-157, and 10mg TB-500 — 70mg total peptide mass, co-lyophilized. Each individual peptide is synthesized to ≥99% HPLC purity, identity-confirmed by ESI-MS, then combined in the fixed 50/10/10 ratio before final lyophilization. No fillers beyond standard mannitol cryoprotectant.

Why is GLOW called GLOW?

The "GLOW" name comes from the combined skin, hair, and recovery profile of the three peptides — GHK-Cu for skin remodeling and antioxidant defense, BPC-157 for vascular and connective tissue support, TB-500 for cellular migration and remodeling. Together they cover the surface (skin, hair) and the deeper repair cascade in a single injection.

How do I dose the GLOW blend?

Reconstitute 70mg in 2mL of bacteriostatic water. Each 0.1mL then contains 2.5mg GHK-Cu + 0.5mg BPC-157 + 0.5mg TB-500. Reference protocols commonly run one daily injection during a 4-6 week loading phase, then taper to 2-3x/week for maintenance. Adjust to your goals.

Why a blend instead of three vials?

Three reasons: lower total cost than buying singles, one injection instead of three, and a tested ratio that matches the protocols most users converge on. The trade-off is the fixed ratio — if you want, for example, double TB-500 without doubling GHK-Cu, the singles are the right call.

Is GLOW good for hair regrowth?

The GHK-Cu component is the headline ingredient for follicle and scalp work. BPC-157 and TB-500 contribute vascular and cellular-migration support that complements the GHK-Cu mechanism. Most users report visible scalp results around the 3-6 month mark of consistent application. Results depend on baseline follicle viability.

Is the entire GLOW blend tested per lot?

Yes — each component is tested before blending, and the final blended lot is re-verified for total mass, copper content (GHK-Cu integrity), and endotoxin. The COA shipped with your vial lists HPLC purity for each peptide, ESI-MS identity, LAL endotoxin <0.5 EU/mg, and sterility, all from ISO 17025-accredited labs.

How long is reconstituted GLOW stable?