Support & Solvents
Injection Kit
50 syringes + 100 padsEverything required to safely reconstitute and inject reconstituted peptides — 50 sterile insulin syringes plus 100 alcohol prep pads.
$25
مجفَّف بالتجميد · 70 mg total (50 + 10 + 10)
Skin & Cosmetic
70 mg total (50 + 10 + 10)
GLOW Blend 70mg — GHK-Cu 50mg + BPC-157 10mg + TB-500 10mg
Skin + hair + recovery stack · Three peptides, one vial · The "glow" combo
Premium Grade
Skin Stack
Skin and dermal-support blend — copper peptide combined with two flagship healing peptides in a single preparation.
- رقم CAS
- Blend
- الكتلة الجزيئية
- Mixed
- النقاء
- ≥ 99.0% (HPLC, each component)
- التخزين
- −20 °C، مجمَّد بالتجفيف
تسلسل الأحماض الأمينية
GHK-Cu 50 mg + BPC-157 10 mg + TB-500 10 mg co-lyophilized
مجاني على مشتريات تتجاوز $59$7.99 إلى الولايات المتحدة (48 ساعة) · $14.99 عالمياً (5 أيام عمل)
تغليف سريمظروف معزول بسيط، لا اسم مركب على الخارج.
شهادة التحليل
تقرير تحليلي لكل دفعة — HPLC، ESI-MS، اختبار LAL للذيفان الداخلي، المعادن الثقيلة، العقامة
الدفعة الحاليةGLO246
مُصدَر2026-04-28
نقاء HPLC99.82%
الذيفان الداخلي (LAL)اجتياز · < 0.5 وحدة ذيفانية/ملغ
عن GLOW 70 mg Blend
Buy the GLOW Blend 70mg at IGF1 Shop. GLOW co-lyophilizes three of the most studied skin and tissue peptides in a single vial: 50mg of GHK-Cu (copper tripeptide) for skin remodeling and antioxidant defense, 10mg of BPC-157 for cytoprotective signaling and vascular repair, and 10mg of TB-500 for actin sequestration and angiogenesis. Together they cover the surface (skin, hair) and the deeper repair cascade in a single injection. Each peptide in the GLOW blend is independently HPLC ≥99% pure, ESI-MS verified, and the blended lot ships with a per-lot Certificate of Analysis from an ISO 17025 laboratory.
يُعرف أيضاً بـ: GLOW blend · GHK-Cu BPC-157 TB-500 blend · Skin & recovery stack
GLOW 70 mg Blend — الآلية والمواصفات
The GLOW blend co-lyophilizes three of the most studied skin and tissue compounds: GHK-Cu for gene-expression modulation and tissue remodeling, BPC-157 for cytoprotective signaling, and TB-500 for actin sequestration and angiogenesis. Designed as a single preparation for dermal and connective-tissue applications.
الجودة ومعايير الإطلاق
كل دفعة من GLOW 70 mg Blend لا تُطلَق إلا بعد اجتياز HPLC الطور العكسي (≥ 99% نقاء مساحة عند 220 نانومتر مقابل معيار مرجعي)، وتأكيد الكتلة الجزيئية بطيف الكتلة ESI، وفحص LAL للذيفان الداخلي دون 0.5 وحدة ذيفانية/ملغ. شهادة التحليل الخاصة بالدفعة مُقدَّمة مع الطلب ومتاحة عند الطلب قبل الشراء.
$132
3 أنابيب · $44/أنبوبة
الأسئلة الشائعة
GLOW 70 mg Blend — الأسئلة الشائعة
What's in GLOW 70mg?
One GLOW vial contains 50mg GHK-Cu, 10mg BPC-157, and 10mg TB-500 — 70mg total peptide mass, co-lyophilized. Each individual peptide is synthesized to ≥99% HPLC purity, identity-confirmed by ESI-MS, then combined in the fixed 50/10/10 ratio before final lyophilization. No fillers beyond standard mannitol cryoprotectant.
Why is GLOW called GLOW?
The "GLOW" name comes from the combined skin, hair, and recovery profile of the three peptides — GHK-Cu for skin remodeling and antioxidant defense, BPC-157 for vascular and connective tissue support, TB-500 for cellular migration and remodeling. Together they cover the surface (skin, hair) and the deeper repair cascade in a single injection.
How do I dose the GLOW blend?
Reconstitute 70mg in 2mL of bacteriostatic water. Each 0.1mL then contains 2.5mg GHK-Cu + 0.5mg BPC-157 + 0.5mg TB-500. Reference protocols commonly run one daily injection during a 4-6 week loading phase, then taper to 2-3x/week for maintenance. Adjust to your goals.
Why a blend instead of three vials?
Three reasons: lower total cost than buying singles, one injection instead of three, and a tested ratio that matches the protocols most users converge on. The trade-off is the fixed ratio — if you want, for example, double TB-500 without doubling GHK-Cu, the singles are the right call.
Is GLOW good for hair regrowth?
The GHK-Cu component is the headline ingredient for follicle and scalp work. BPC-157 and TB-500 contribute vascular and cellular-migration support that complements the GHK-Cu mechanism. Most users report visible scalp results around the 3-6 month mark of consistent application. Results depend on baseline follicle viability.
Is the entire GLOW blend tested per lot?
Yes — each component is tested before blending, and the final blended lot is re-verified for total mass, copper content (GHK-Cu integrity), and endotoxin. The COA shipped with your vial lists HPLC purity for each peptide, ESI-MS identity, LAL endotoxin <0.5 EU/mg, and sterility, all from ISO 17025-accredited labs.
How long is reconstituted GLOW stable?
~30 days refrigerated at 2-8°C, protected from light. The dry vial is stable for 24+ months sealed. The blue tint of the solution after reconstitution comes from the copper complex in GHK-Cu — that's normal. A loss of color over time can indicate copper dissociation.
