凍結乾燥 · 5 mg + 5 mg / vial BPC-157 + TB-500 Blend 5 mg + 5 mg / vial — HPLC検証済みペプチドバイアル

Healing & Recovery 5 mg + 5 mg / vial

BPC-157 + TB-500 Blend (5mg + 5mg) — Wolverine Stack

Q: What is in the BPC-157 + TB-500 blend?

Each vial contains 5mg of BPC-157 and 5mg of TB-500 co-lyophilized in a single vial — 10mg total peptide mass. Both peptides are synthesized separately to ≥99% HPLC purity, identity-confirmed by ESI-MS, then combined in a 1:1 mass ratio before final lyophilization. No fillers, no excipients beyond a trace mannitol cryoprotectant standard for peptide lyophilization.

Q: Why combine BPC-157 with TB-500?

The two peptides act on complementary recovery pathways. BPC-157 supports nitric oxide signaling, growth-factor recruitment, and early-phase vascular repair. TB-500 amplifies cellular migration and structural remodeling via actin regulation. Combining BPC-157 + TB-500 covers both the initiation and the propagation phases of the repair cascade from a single injection.

Q: What is the typical dose for the BPC + TB blend?

A common reference protocol is 250mcg BPC-157 + 250mcg TB-500 once daily during a loading phase, then 250mcg of each twice weekly for maintenance. Reconstituting 10mg total in 2mL of bacteriostatic water yields 500mcg of each peptide per 0.1mL. Adjust dose and frequency according to your own goals and existing protocols.

Q: Is the blend more cost-effective than two separate vials?

Yes. The BPC-157 + TB-500 blend SKU prices below the combined cost of one TB-500 5mg vial and one BPC-157 5mg vial, and it cuts your injection count in half. The trade-off is that the dose ratio is fixed at 1:1 — if you want an asymmetric protocol, buy the singles.

Q: How do I reconstitute the blend?

Add 2mL of bacteriostatic water slowly to the vial, swirl until fully clear, and refrigerate. At 2mL volume each 0.1mL contains 500mcg of BPC-157 and 500mcg of TB-500. The reconstituted solution is stable refrigerated for ~30 days; the dry vial is stable for 24 months sealed.

Q: How long is a typical Wolverine stack cycle?

Loading cycles commonly run 4-8 weeks. Maintenance phases of 2-4 weeks may follow, with a wash-out period before re-cycling. Users targeting a specific injury frequently report shorter, more aggressive cycles; those running it for long-term joint maintenance favor lower, less-frequent dosing.

Q: Is each batch tested?

Every batch of the BPC-157 + TB-500 blend ships with three documents on its COA: HPLC purity ≥99% per peptide, ESI-MS molecular weight confirmation, and LAL endotoxin <0.5 EU/mg. Testing is performed in ISO 17025-accredited third-party labs. The batch number is laser-printed on the vial.

Q: Can I stack the blend with GHK-Cu or KPV?

Yes — that combination is the basis of our GLOW (70mg, +GHK-Cu) and KLOW (80mg, +GHK-Cu +KPV) blends. If you want one injection covering vascular, structural, and anti-inflammatory pathways, the pre-blended SKU is usually cleaner than mixing vials manually.

Co-lyophilized healing duo · Vascular + structural recovery · One injection

Premium Grade ベストセラー

Co-lyophilized healing stack — the canonical pairing of gastric pentadecapeptide and thymosin fragment for tissue support.

CAS番号: Blend
分子量: Mixed (1 420 + 4 963 Da)
純度: ≥ 99.0% (HPLC, each component)
保存: −20 °C、凍結乾燥

アミノ酸配列 BPC-157 (GEPPPGKPADDAGLV) co-lyophilized with TB-500 fragment

バンドルを選択

1 バイアル $42 /バイアル $42 合計最も人気 3 バイアル $29 /バイアル $87 合計ベストバリュー 10 バイアル $21 /バイアル $210 合計

$59以上で無料米国向け $7.99（48時間）・世界向け $14.99（5営業日）

目立たない梱包目立たない断熱梱包、外部に化合物名なし。

分析証明書

ロット別分析報告書 — HPLC、ESI-MS、LALエンドトキシン、重金属、滅菌性

現在のロットBPC853

リリース済み2026-04-15

HPLC純度99.59%

エンドトキシン（LAL）合格 · < 0.5 EU/mg

完全なCOAを読む全ラボ結果を見る

BPC-157 + TB-500 Blendについて

Buy the BPC-157 + TB-500 blend at IGF1 Shop — the canonical "Wolverine stack" combining two of the most studied recovery peptides in a single vial. 5mg of BPC-157 (Body Protection Compound) is co-lyophilized with 5mg of TB-500 (Thymosin Beta-4 fragment) in a 1:1 mass ratio. BPC-157 contributes pentadecapeptide cytoprotection while TB-500 contributes actin remodeling and angiogenesis — a complementary mechanistic profile that covers both initiation and propagation phases of the repair cascade. Each component is HPLC ≥99% pure, ESI-MS verified, with a per-lot Certificate of Analysis from an ISO 17025 lab.

別名： BPC-157 TB-500 blend · Wolverine stack · BPC TB blend · Healing stack

BPC-157 + TB-500 Blend — 作用機序と仕様

This blend combines two of the most studied healing peptides in a single vial. BPC-157 contributes pentadecapeptide cytoprotection while TB-500 contributes thymosin-fragment-driven actin remodeling and angiogenesis — a complementary mechanistic profile in one preparation.

品質とリリース基準

BPC-157 + TB-500 Blendのすべてのロットは、逆相HPLC（参照標準に対して220 nmで面積純度≥ 99%）、分子量のESI質量分析確認、および0.5 EU/mg未満のLimulus Amebocyte Lysate（LAL）エンドトキシン試験に合格した後にのみリリースされます。ロット固有の分析証明書は注文に同梱され、購入前にリクエストに応じて提供可能です。

よくある質問

BPC-157 + TB-500 Blend — よくあるご質問

What is in the BPC-157 + TB-500 blend?

Each vial contains 5mg of BPC-157 and 5mg of TB-500 co-lyophilized in a single vial — 10mg total peptide mass. Both peptides are synthesized separately to ≥99% HPLC purity, identity-confirmed by ESI-MS, then combined in a 1:1 mass ratio before final lyophilization. No fillers, no excipients beyond a trace mannitol cryoprotectant standard for peptide lyophilization.

Why combine BPC-157 with TB-500?

The two peptides act on complementary recovery pathways. BPC-157 supports nitric oxide signaling, growth-factor recruitment, and early-phase vascular repair. TB-500 amplifies cellular migration and structural remodeling via actin regulation. Combining BPC-157 + TB-500 covers both the initiation and the propagation phases of the repair cascade from a single injection.

What is the typical dose for the BPC + TB blend?

A common reference protocol is 250mcg BPC-157 + 250mcg TB-500 once daily during a loading phase, then 250mcg of each twice weekly for maintenance. Reconstituting 10mg total in 2mL of bacteriostatic water yields 500mcg of each peptide per 0.1mL. Adjust dose and frequency according to your own goals and existing protocols.

Is the blend more cost-effective than two separate vials?

Yes. The BPC-157 + TB-500 blend SKU prices below the combined cost of one TB-500 5mg vial and one BPC-157 5mg vial, and it cuts your injection count in half. The trade-off is that the dose ratio is fixed at 1:1 — if you want an asymmetric protocol, buy the singles.

How do I reconstitute the blend?

Add 2mL of bacteriostatic water slowly to the vial, swirl until fully clear, and refrigerate. At 2mL volume each 0.1mL contains 500mcg of BPC-157 and 500mcg of TB-500. The reconstituted solution is stable refrigerated for ~30 days; the dry vial is stable for 24 months sealed.

How long is a typical Wolverine stack cycle?

Loading cycles commonly run 4-8 weeks. Maintenance phases of 2-4 weeks may follow, with a wash-out period before re-cycling. Users targeting a specific injury frequently report shorter, more aggressive cycles; those running it for long-term joint maintenance favor lower, less-frequent dosing.

Is each batch tested?

Every batch of the BPC-157 + TB-500 blend ships with three documents on its COA: HPLC purity ≥99% per peptide, ESI-MS molecular weight confirmation, and LAL endotoxin <0.5 EU/mg. Testing is performed in ISO 17025-accredited third-party labs. The batch number is laser-printed on the vial.

Can I stack the blend with GHK-Cu or KPV?